
Speedo Cable Replacement
Started by
Razor
, Apr 24 2011 01:55 PM
9 replies to this topic
#2
Posted 24 April 2011 - 03:28 PM
according to the EPC the speedo cable is in 2 parts. The main length back from the clocks and a shorter length straight up for 6" or so from the gearbox. Can't say I've ever noticed this extra bit myself though
the short half part number cross references with a 88 camry/vista part, but I can't find another example of the top half listed. In saying that though - it's a fair bet that most of the cables available ( especially from the early 90s Vintage ) will have similar drive ends, so there's a chance that any old Toyota one will work ( Corolla, Starlet etc ) - whether it's long enough or not of course.
( just re-read this one back - not massively helpful, sorry ! )
the short half part number cross references with a 88 camry/vista part, but I can't find another example of the top half listed. In saying that though - it's a fair bet that most of the cables available ( especially from the early 90s Vintage ) will have similar drive ends, so there's a chance that any old Toyota one will work ( Corolla, Starlet etc ) - whether it's long enough or not of course.
( just re-read this one back - not massively helpful, sorry ! )
#6
Posted 02 May 2011 - 11:31 AM
Just to confirm for future fellow OZ members
Starlet speedo cable can be used, they are a 1 piece unit, all you have to do is remove the 2 piece cable and swap 'em.
Auto or manual they are both the same.
Good information - cheers !
Reply to this topic

1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users